The new MSR400 is a 400-watt powered loudspeaker built to produce clean, powerful sound in a compact package. Using separate amplifiers for high and low frequencies allows precise control and extended low frequency punch. The sturdy, lightweight enclosure can be used as both a main speaker or on the floor as a wedge-type monitor.
The Yamaha MSR400 Powered Speaker is an active bi-amped two-way speaker cabinet, using 12“ woofer and a 1.75“ compression driver. Traditionally, much of the work in putting together a high-performance sound system involved getting the proper components and getting them to work together optimally, especially matching the proper power amplifier with your speakers. Yamaha has taken a lot of the guesswork out of the process with the introduction of their MSR400 powered speakers. With a frequency range of 50Hz to 20kHz and a max. SPL of 121dB, the Yamaha MSR400 can really fill a room.
The Yamaha MSR400 accepts nominal input levels ranging from mic level 36 dB to line level +4 dB, so you can directly connect any source from microphones to professional line-level gear. Three parallel connections are available, two balanced XLR connectors and one balanced 6.5mm jack, that can be used as either inputs or parallel outputs. The Yamaha MSR400 also features an input level control for matching with the source signal. Low and high EQ controls can be used to adjust the respective bands over a plus-or-minus 3dB range.
Priced Individually
Features;
-
Bi amplified 2-way powered speaker.
-
Bass reflex enclosure.
-
Frequency Response: 50Hz-20,000Hz.
-
Maximum SPL: 121dB SPL at 1 meter.
-
Output Power: 400w
-
12" bass driver
-
1.75" compression driver.
-
Dispersion: 90 degrees horizontal by 40 degrees vertical.
-
Controls: Level Control, EQ Low ( +/-3dB at 55 Hz).
-
Indicators: Power ON Green LED, Clipping Red LED.
-
Input Sensitivity: MIC -36dB, LINE +4dB.
-
Dimensions: 16" x 25 3/4" x 13 7/8".
-
50.71 Lbs.
